Leveling Shims 0-8 mm (set of 4)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wedge shims from 0.8 to 8 mm over 100 mm, with grip grooves and a mark every 2 mm. Set of 4.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Wedge shims from 0.8 to 8 mm over 100 mm, with grip grooves and a mark every 2 mm. Set of 4.
100 × 30 mm each
Marks at 2, 4, 6 and 8 mm
Stack two for up to 16 mm
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 1 h 15 min, 37 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Calzos de nivelación en cuña, juego de cuatro. Sin soportes: 1 h 15 min, 37 g.
العربية
أسافين تسوية، طقم من أربع.