1 / 2
Leveling Shims 0-8 mm (set of 4) — image 1
1 / 2

Leveling Shims 0-8 mm (set of 4)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wedge shims from 0.8 to 8 mm over 100 mm, with grip grooves and a mark every 2 mm. Set of 4.

Rating
0 / 5
Likes
3
Downloads
21
Makes
0
Views
39
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Wedge shims from 0.8 to 8 mm over 100 mm, with grip grooves and a mark every 2 mm. Set of 4.

  • 100 × 30 mm each

  • Marks at 2, 4, 6 and 8 mm

  • Stack two for up to 16 mm

How it was checked

Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 1 h 15 min, 37 g.

Parametric OpenSCAD source included: change the values at the top of the file.

About this design

Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Calzos de nivelación en cuña, juego de cuatro. Sin soportes: 1 h 15 min, 37 g.

العربية

أسافين تسوية، طقم من أربع.

Tags