167 models
I'd recommend printing the full set Print from ABS/ASA/PETG - I don't recommend PLA USE the thinnest LH possible for your printer After install, recalibrate your printer and redo input shaping.
If you encounter significant variations in bed level, especially in one of the corners, consider printing these shims and placing them under the bed supports. By doing so, your bed level will greatly improve and become easier to adjust.…
UPDATE: Added 1.1 and 1.2mm shims UPDATE: New version with markings. It doesn't require to destroy the top level of bed to install, like some modifications i've seen before. It's designed, so you can put it from the side and rotate into…
I recently came across another Creality owner that had noticed his gantry was off axis, this will off course cause some serious layer shifting on bigger prints. Upon checking myself (I used the PEI sheet that comes along with the printer…
Recommended slicer settings: Layer height: 0.1 Initial Layer height: 0.1 Infill: 100% Print material: Preferably ABS+ or ASA, although I've printed it using PLA and it's holding up well. Tutorial: A good tutorial on how to use the shims…
The extended handle version can be used not only for the rear left bed level point but as a regular shim as it is more convenient to install
I was struggling with my bed gantry being not level, and the Anycubic wiki wanted me to adjust the belt and leadscrews, but that was too much work for the fine adjustment I wanted to make, so I made these little spacers to go between the…
Dial your bed In. Parametric Shims work with your Stock Hard Spacers and Silicone spacers found on AliExpress or Amazon Premade Shims for Stock Factory Spacer and Silicone Spacer if you don't want or need to adjust the size. No worries…
Straightens the belt path, increases accuracy, and reduces belt wear against X gantry. For Ender 3 V2 Neo , or similar carriages. This greatly increased the smoothness of the movement on my X axis. It's a must have mod in my opinion.…
ENDER 3 V3 KE BED LEVELING SHIMS INCLUDED SPREADSHEET TO CALCULATE SHIMS OR SPACERS
100% infill at rectilinear is what you want. Pick something with detail ≤ 0.10mm to get a smooth shim. Thicker side is on top of text.
I made these shims to help line up the motor with leadscrew. The exact process is documented in my video on removing Z banding. These shims are not a one-size-fits-all, you will likely have to make them thicker or thinner based on your…
Leveling shims for your Blackstone. The original version provides a single size, which gives you a ¼" rise with a wheel. Each one you stack, though, gives you ½" increase. I needed ½" total height increase, so I wanted to remix this.…
This 3D-printed Furniture Wedge Set includes five precise thicknesses (1 mm, 2 mm, 3 mm, 4 mm and 5 mm), designed for a wide range of household, workshop, and DIY uses. Each wedge provides an accurate, reusable solution for leveling…
Remix of Low Profile Prusa Mini Anti-Vibration Feet by Alexander Þór . This is the most effective upgrade I have made for my printer. Absolutely brilliant model. The printer wobbled after installing these dampening feet, so I modeled…
We've all got that one table that just doesn't sit right, or perhaps you're at the coffee shop and the chair keeps rocking. Here's your all-in-one quick solution to stop the shimmy: shims! Slide the sizer into the gap to quickly determine…
This is a simple shim for your toilet, it is ¼" at the highest point. I printed mine out of tpu so it is very durable I recommend printing at 0.2mm or higher so you get that staircase effect, that will help the shim stay in place. All…
This set includes distance shims in thicknesses from 0.5 mm to 12 mm , perfect for woodworking, furniture assembly, and any situation where precise spacing is required. Ideal for aligning, leveling, and adjusting components. Durable,…
Many door frames are not square, or the door hinges are not mounted correctly. This causes the door to not fit evenly in its frame. Often, a door will rub on the frame near the top on the latch side, making a rubbing squeal and/or making…
When I have a wonky table I like to level it with 3D printed leg extensions. However, I hate measuring how tall the extension has to be. No more! Now I can stack these 7 shims to make any block between 1 mm and 127 mm tall, in steps of 1…
The CORE One's bed can be tilted relative to the CoreXY kinematic's plane by a surprisingly high amount (up to about 1 mm height difference between edges). While this is compensated to some degree by the printer's automated bed level…
Here are some simple shims to help with installing drawer faces. They not only provide consistent spacing, they help hold the face in place while you are getting things lined up! Filename format: 12_2mm is for 12mm wood with a 2mm reveal.…
I made this simple Gridfinity Box with Metric Spacer/Gauge Box in 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm thickness. I colorcoded each Spacer and also labeled them with white numbers. Each Spacer also has the corresponding radius on…
I recently built a worktable with a space for my dewalt 7485 tablesaw in one end. As the table is on wheels, the saw sometimes get a little out of allignment when moving the table around. Also, the wood got slightly out of allignment…
ReadMe.txt Unterlegstuecke (Parallelstuecke) 1 bis 10 mm Anwendung: Unterlegstücke mit 1 bis 10 mm Stärke. Dieses Sortiment ist eine Box incl. Deckel mit jeweils 3 Unterlegstücken je größe. Material: PLA Schichtdicke: 0,2mm Füllung: 25%…
Symmetric shims for Sabfoil fuselage, can be used to increase and decrease the angle of the attack on the tail. I have printed it with TPU, 0.1mm layer height.
I find the default fit on the Walksnail goggles X very uncomfortable – they press on my nose. Theses shims will tilt the goggles up a notch, making them very comfortable to wear, with no light leak. I installed them by applying sticky…
With numbers which makes them easier to identify, especially at night. I printed my set from PETG, 4 perimeters, 100% infill. Might need a bit post processing to touch up any PETG stringing and smoothen the numbers.
Eufy Video Doorbell 2k angled shim to be used in conjunction with the provided left/right angled bracket. The shims included are specific if the Eufy angled bracket angles to the right (angled to the left when looking directly at the…
Vortex has discontinued their Zero Stop shims for the gen 1 PST series scopes. I needed a bit more space than what my original shims could do, so designed a set of additional shims I can use. Made a set of 5 thicknesses, from 0.2 to 1.0.…
The metal grate on the Breville Bambino Plus drip tray does not sit tightly on its plastic reservoir, so it rattles around while the coffee machine is running. I've designed some small shims to attach to the plastic reservoir that keep…
Shims are commonly added behind door hinges to adjust the gap between the door and the jamb. These door hinge shims are designed to slip behind the hinges without needing to fully unscrew the hinge from the jamb. Included are shims in 1mm…
These shims fit the ANNIMOS 20KG RC Servo (Amazon https://www.amazon.com/gp/product/B0769DFJVK). I found that the stock fit on the 3DSets Buggy ( https://www.3dsets.com/product/model-7-buggy/ ) cause the steering to bind. These shims…
Some Ionic-5s have an annoying rattle coming from the trunk lift gate making side-to-side movements while driving. Some dealers will help with this, but I decided to try with some simple shims after hearing how it is handled by the dealer…
Use Case Similar to my other model on drawer slides, when it came time to attaching my drawer faces to my built in garage cabinets I needed a repeatable spacer. For years we used a deck of playing cards with success. I originally build…
The materials you need to purchase are as follows： 1、8mm diameter linear shaft with a length of 493mm x2 2、608ZZ bearings x24 The materials you need to prints 1、roller x12 2、Fixation of both ends of the spool x4 3、Shims between bearings x14
14MM Airsoft Muzzle Device Timing System (Shims) These shims are printed and used to tighten muzzle devices (flash break, suppressor, tracer unit, etc) on 14MM Airsoft barrels to specific orientations. The shim(s) should fit between the…
Here's a few reasons why you may NOT want to 3D print your own shims, can you think of any more? Dimensional accuracy of shop-bought shims is better (do I care?) Shop-bought shims are about 2% cheaper. Last year they were about 30%…
The Multifunction Arm system is fantastic, but, being made from plastic, not 100% rigid. Gravity, on the other hand, is a bitch, and won't hesitate to flex and bend the system until your screen or other device on the end of the arm is not…
This makes using the OnePlus Open with the G8+ more comfortable by keeping it centered and leveled as the phone has an absurdly large camera bump making it lopsided, giving it a chance to pop out of the controller.
Ensure first layer is good enough. Obviously these shims are for helping fix that, but these need as good of a first layer as possible. 0.3mm first layer can help mitigate any issues. Just print slower than you normally would. I use Orca…
I inherited a rolling table for the garage from my dad, but the top was not flat. Designed these to cradle the screws under the top so I could true up the top. Fits nicely on top of standard 2x lumber (1.5"). Just change the Z height to…
This is a modified version of the "Dji Fpv Goggle Shims" made by kwboost. My head is quite narrow, so I made this version thicker, and shifted more towards the top of the face plate. Have a look at the instructions provided by kwboost:…
ILF Recurve Shims Precision-fit shims for quickly adjusting limb pitch on ILF recurve bows—just like adding limb bolt turns, but without touching the bolts. These are great for training with a slightly heavier draw or quick re-tuning for…
Sometimes, on cheaper guitars especially, the pickups are way too low and that impacts the sound quality of the guitar. These shims raise the height of P90s. They go between the pickups and the body of the guitar. 2.5mm Tall, you can…
Shim for 28.6 mm diameter seat tubes to accept 34.9 mm (mountain) front derailleurs. The 28.6 mm diameter may come out a little small, but the print flexes enough to grip the frame just fine. 14 mm tall. I think I made this a long time…
Simple box for shims for cabinetry, containing shims in the following sizes: - 10mm - 4mm - 3mm - 2mm For the joints you will need 2 M2 8mm hex screws For the latch you need 2 M2 16mm hex screws. If you only want the box, with no shims…
I have built the Prusa i3 Bear Half ( https://www.thingiverse.com/thing:2562174 ) which is a Prusa i3 frame upgrade. Cutting the 20x40 to the correct length is critical to obtaining a square frame, but in actual practice such cuts are…
I recently lost a shim in the grass at the track when changing the toe, turns out you'd have to buy brand new rear arms to get more plastic shims!! so I designed these. The kit ones are 2mm, so if you want replacements, then print a load…
LaTrax Teton/Rally/Prerunner differential shims, because I cannot find the shims local , so I 3d printed them , I recommend to put the shims like this, shim first, after , bearing
Energy prices are skyrocketing, winter is coming, and unfortunately I'm heating my water with electricity, so I've designed this shim to reduce my energy bill. I'm using the 3.5 mm version and was able to reduce my water flow from 12…
When trying to find shims to go between seat post for my mountain bike and Tout-Terrain Trailer collar I couldn't find quite the right size… so I made my own. I have uploaded my own sizes that I needed and also a link to a file where you…
I've finally got round to aligning the mirrors in my K40 laser cutter. Using the mirror alignment guide on k40laser.se, I needed to raise mirror 2 a little to get the alignment perfect. I tried using washers, but that was just too awkward…
Pairs of shims are available in 1mm increments up to 10mm. If not printing the pair, be sure to select the correct side. They are not interchangeable.
These spacers are 60mm x 25mm and designed for easy and precise height and distance adjustment between two surfaces. They can be used for tasks like leveling a tabletop, raising cabinets, or creating a consistent gap between components.…
Some basic shims to use in all sorts of different applications, from shimming something level to shimming out the side of a stud or wallboard to make something perfectly level. I made them to replace some various sizes in a board shim…
Shim for 31.8 mm diameter seat tubes to accept 34.9 mm (mountain) front derailleurs. The 31.8 mm diameter may come out a little small, but the print flexes enough to grip the frame just fine. 14 mm tall. Made in Autodesk Inventor.…
I loved my Px, but they have silly flimsy arm designs (thanks to Native industrial designs for being very practical), and mine broke after a few years of abuse. Supergluing the arm back into the slot was ineffectual because there is…
I really hate how Sovol provided no provision for properly sealing off or even attaching the bottom edge of an enclosure in the shape of the base. So… I made these up, to give a surface for attaching some foam tape, and to provide some…
This is for the Magswitgh 95 Since the Magswitch mounting height is 3/4" and I use Baltic Birch (which is only 18mm) for my jigs which makes the switch sits proud of the base by 1.05 mm which is not a good thing. So I made a couple of…
These are 4mm shims meant to clip inside the Z-Axis towers to make the M5 compatible with Volcano hot ends. Print 2x, PLA/PETG @30% Cubic (100% recommended) You will need the following items: Polisi3D Volcano Hot End Block Volcano Nozzle…
I had to bump up the size of the M8 wingnut designed by ‘ Meister Edel ’ so it would work with my p8 nozzle. The tapered washer is just to make turning the wingnut easier when it is sitting on top of one of the metal guides. The slider…
A simple printable method using stock parts to simplifier placing shim stacks unders the stock 8dia steel supports. Consists of a cap that can contain the needed shims over the stock metal support allowing easy placement between the…
The ones with the square are 1 degree, the ones with triangle are 0.5 degree. Stack them to obtain more than 1 degree. I printed in 0.7 layers with turned down speed (takes less than 10min per shim). I attached the Prusa Slicer file in…
Set of differential shims type 188 for BMW E36 is used to limit the clearance between the differential gears. Thickness 1-2mm. Individual parts need to be printed with different settings to maintain the thickness (height) of the shims…
Save filament instead of Poop! I surprisingly use a lot of little shims in all sorts of situations to add stability to an uneven part or to space things or whatever. When printing in multicolor in Bamboulabs you can select a file and…
The shims that came with the shotgun didn't work for me, so I made my own!
Inside threads would benefit from printing with thinner layers (used 0.12 myself, but could go a bit higher). Also added a thread test piece if you want to test the threads.
Fits E46 & E60 shifters (tested on 25117546373), but should fit on most BMW shifters. BMW shiftsticks have inherent play due to the rubber connecting both halfs, even brand new ones. This will help remove that play down to near 0, or make…
I needed to make a door stop a little more tight and so I made these mini shims to do the job.
I installed 2x Ikea Mittled 40cm light bars into my Original Prusa Enclosure by attaching them to the existing holes in the ceiling. Since the LED bars are only loosly fitting on their mounts and can move left and right I noticed that…
Just slapped together some quick shims for my rotator so the masts can't twist.
Creality Ender 3 V3 SE/KE Bed Leveling Shims. A slot has been added to facilitate shim installation, eliminating the need to remove the table. You simply need to loosen the screw and lift the table slightly to insert the shim.
Ikea IVAR is great system that's very customizable. I just didn't like that in my system the top of my sliding door cabinet didn't line up with the shelves surrounding it. So, I made these shims and posts to insert on the underside of the…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you RC T98 Land Rover Defender shock absorber support. Raises the car by at least 10mm!!!...the lift is really noticeable and the car is also more stable. It…
I've created this shim (spacer) to fit a cover for the Noctua fan of my Prusa I3 MK3 printer, with this thing the cover sits flat on the fan. For the fan cover, I used this thing: https://www.thingiverse.com/thing:2917644 Print…
I needed some shims to go behind some cupboards to keep them aligned when the wall is not quite straight. These fit over the wall screws. Three sizes which cover 1 mm to 10 mm.
1.0mm and 0.5mm shims for Vevor MR-13B drill bit sharpener, allowing for more aggressive cuts. recommended 0.1mm layer height for strength. Onshape document:…
Printable piece to lock IKEA's MARKUS chair at a height of 90mm with 5mm shims to adjust to the chairs maximum height of 115mm. Shim shown in grey in photo. Useful if the chairs hydraulics are beginning to fail and the chair drops by…
Series of different thickness of shims that I used used to level 1"x dimensional lumber with 1"x furring strip lumber during model train benchwork assembly, but can be used wherever a flat shim is needed. Category: Other
I was using a 50mm FMS EDF in the Skyray model published by PTIKyle. The FMS EDF has a narrower bell and a narrower body than the XFly units, resulting it in falling into the duct and not being sealed. This is a quick shim set to make the…
1mm-16mm shim for screen door latch
These shims allow the user to mount a real London Underground Metropolitan Line A-stock luggage rack to their wall. The London Transport Museum sells recommissioned luggage racks - which are replicas from the 1960's Metropolitan Line…
To make a nice top mount for the Sunlu S8 Z-Axis Leadscrews, you can use the typical Creality Ender3/CR10 Solid mounts, when you add a little spacer. Print this one twice and you are good to go. Mine are:…
Shims to create a positive drainage flow across each tier of a Vivosun hydroponics system. 5 shim heights - 0 inch, 1/8 inch, ¼ inch, 3/8 inch and ½ inch 8 Shims per tier level, you will need 3 sets of shims for the 3 tier rack. Each shim…
These prints are to made with 100% infill, but depending on the top layer counts you have that may not matter. Helped a lot to level the bed.
What is it, and why? I have been having issues with the front rollers/feeders when running heavier/full rolls of filament in my HydraPro modified Bambu AMS units. This is specifically occurring with the far-left and far-right slots. I…
The WD Elements fit a bit too lose and tend to fall through the cooler on the fan, so you can print these out.
Shims for the left and right microprobe spacing so you don't have to reprint the whole thing.
These shims are to move the board nose down on the Armstrong Performance Mast specifically to tune in for pump foiling and dockstart. The Armstrong Performance Mast has a built in rake angle of 1 degree which noses the board up so the 1…
A few of my stabiliser shims blew away in a gust while rigging up so I designed some replacements. I added in 0.75mm and 1.25mm shims to this set as there were times that the standard phantom 1.0mm shim felt like it was not quite right…
Attach a BTOD VertDesk v3 to a Fully Jarvis bamboo desktop, without drilling into the wood. The VertDesk v3 frame is very stiff I but didn't like any of the desktop options at BTOD. So, I bought a Jarvis bamboo desktop from Fully and…
My friend and I both bought HeeWing T1 Rangers. Even after multiple flights of experimenting with CG and trim, the plane tends to climb aggressively with high throttle and nose dives off throttle (assuming trimmed for level flight at 50%…
This is a set of shims and drilling templates I designed as I was building stairs for my deck (2 steps). They also ensure a 5 mm spacing between boards for expansion. In France, the sections for standard boards are 145 mm x 27 mm or 120mm…
SRAM Front Derailleur Shims E1 Group, in 3 variants. The 16.5mm is made for Cervelo Caledonia 5 to fit 43T/30T chain-ring as the derailleur needs to be dropped to the bottom of the hanger. May fit also other brands and sizes. The E1 shims…
Wedge shims from 0.8 to 8 mm over 100 mm, with grip grooves and a mark every 2 mm. Set of 4. 100 × 30 mm each Marks at 2, 4, 6 and 8 mm Stack two for up to 16 mm How it was checked Checked with an overhang audit of the mesh and sliced in…
0.2, 0.4 and 0.6mm shims for Contax Zeiss lenses. They are tested with Leitax adapters, but might work with others but not tested
Here is a fairly full set of metric shim / spacer models for machine screws, rods, bolts, axles etc. Most common sizes should be here, but if not, please leave a comment and I'll try to fill in anything that is missing. The inside…
Fitted shims to allow the attachment of Grabo slender seal expansions. Created with a ramped clip bed, in order to allow better bite by the clips.
![Ikea IVAR Cabinet with Sliding Doors Shims [Fixes Height Mismatch]](https://media.printables.com/media/prints/119234/images/1158942_50f82914-4b28-4433-aba3-60233d2d794a/img_3385.jpg)
