Metric Spacer/Gauge Block Set/Woodworking Shims with Gridfinity combatible Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Gridfinity Box with Metric Spacers 1mm-10mm. Each Spacer also has the corresponding radius on one corner.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 201
- Makes
- 1
- Views
- 1,069
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this simple Gridfinity Box with Metric Spacer/Gauge Box in 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm thickness. I colorcoded each Spacer and also labeled them with white numbers. Each Spacer also has the corresponding radius on one corner. All Spacer fit neatly in the Gridfinity Box for easy storing.
Print Settings
Distance Box
For the Distance Box i used 0.25mm Layer Height and 15% Infill. I printed it with Polymaker Polyterra PLA Cotton White.
Distances
For the Distances itself i used 0.1mm Layer Height and 25% Infill. You can vary the Infill as you like.
The Colors i used where:
1mm: Polymaker Polylite PLA Sky Blue
2mm: ESUN PLA Grass Green
3mm: Polymaker Polyterra PLA Savannah Yellow
4mm: Polymaker Polyterra PLA Sunrise Orange
5mm: Polymaker Polyterra PLA Muted Red
6mm: Polymaker Polyterra PLA Lava Red
8mm: Polymaker Polylite PLA Purple
10mm: Polymaker Polylite PLA Azure Blue
For the Numbers on the Spacers i also used Polymaker Polyterra PLA in Cotton White, the same as for the Box.
Edit: added a Version with a outer Radius Gauge and one with inner and outer Radius Gauges.
