GPU Anti-Sag Support, Adjustable 75-125 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stops heavy graphics cards from sagging. Tube, post and pin set the height in 5 mm steps from 75 to 125 mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Stops heavy graphics cards from sagging. Tube, post and pin set the height in 5 mm steps from 75 to 125 mm.
Foot 56 × 40 mm
12 height steps of 5 mm
Ø34 pad under the card
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 41 min, 15 g + 51 min, 11 g + 3 min, 0 g.
Keep it away from fans and hot heatsinks; PETG handles case temperatures better.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Soporte antipandeo para tarjeta gráfica. Sin soportes: 41 min, 15 g + 51 min, 11 g + 3 min, 0 g.
العربية
دعامة لبطاقة الرسوميات.