VHB Mounting Plate for SmallRig 2060 Cold Shoe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-profile adapter plate for attaching a SmallRig 2060 cold shoe to flat surfaces with 3M VHB tape.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Use this adapter plate and VHB tape to add a cold shoe to the back of your monitor or PC case, dash board, or any other flat surface.
This mounting plate uses the SmallRig's locating-pin spacing to prevent the cold shoe from rotating around the main 1/4"-20 screw. Recessed pockets on the underside of the plate hold the nuts in place.
Needs:
SmallRig 2060, including the supplied 1/4″-20 screw and two M2.5 screws
2 x M2.5 nuts
Caution: VHB tape creates a very strong bond and can be difficult to remove without damaging the mounting surface. Treat this as a permanent mount and choose your location accordingly.
I am including a detailed model of the SmallRig 2060 Cold Shoe if anyone else wishes to use it for reference.