1 / 6
Zapadka regulacji podłokietnika fotela / Office Chair Armrest Adjustment Ratchet (Replacement) — zdjęcie 1
1 / 6

Zapadka regulacji podłokietnika fotela / Office Chair Armrest Adjustment Ratchet (Replacement)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

· print with PETG for better durability; · print without support; · improved strength by wall×5, infill density 10%.

Ocena
0 / 5
Polubienia
3
Pobrania
0
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Zapadka regulacji podłokietnika fotela / Office Chair Armrest Adjustment Ratchet (Replacement)

 

Oryginalny mechanizm w moim fotelu poddał się i połamał po 5 latach codziennego użytkowania. Bardzo zależało mi na przywróceniu pełnej sprawności podłokietnika (regulacja kąta i wysuwu), dlatego zaprojektowałem ten zamiennik.

Element zastępuje oryginalną, wtryskiwaną część i przywraca fotel do życia. Po zamontowaniu działa w 100%! Czas pokaże, jak długo wytrzyma w perspekwie kolejnych lat, ale na ten moment sprawuje się rewelacyjnie i jestem z niego bardzo zadowolony.

Wskazówki do druku:

  • Filament: Drukowałem używając Sunlu PETG. Gorąco zalecam PETG, ABS lub ASA ze względu na obciążenia mechaniczne, jakie przenosi ten element.

  • Ustawienia: Dla pewności polecam zwiększyć liczbę obrysów (ścianek) do 4-5 oraz ustawić gęstsze wypełnienie (np. 40-50% Gyroid), co usztywni konstrukcję.

  • Druk: Element bez problemu i bardzo dobrze drukuje się na szybkich maszynach Core X-Y.

 

The original mechanism in my office chair broke after 5 years of daily use. I really wanted to keep the chair fully functional (armrest angle and extension adjustment), so I designed this replacement part.

It replaces the broken original factory ratchet and brings the chair back to life. Once installed, it works 100%! I'm not sure about its long-term durability over the years yet, but right now it performs perfectly and I'm extremely satisfied with the result.

Print settings:

  • Filament: I printed this using Sunlu PETG. I highly recommend PETG, ABS, or ASA due to the mechanical stress this part handles.

  • Settings: For maximum durability, I suggest increasing the number of perimeters (walls) to 4-5 and using higher infill (e.g., 40-50% Gyroid) to make it stiffer.

  • Printing: Successfully and cleanly printed on a fast Core X-Y 3D printer.

Tagi