Zapadka regulacji podłokietnika fotela / Office Chair Armrest Adjustment Ratchet (Replacement)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
· print with PETG for better durability; · print without support; · improved strength by wall×5, infill density 10%.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 0
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Zapadka regulacji podłokietnika fotela / Office Chair Armrest Adjustment Ratchet (Replacement)
Oryginalny mechanizm w moim fotelu poddał się i połamał po 5 latach codziennego użytkowania. Bardzo zależało mi na przywróceniu pełnej sprawności podłokietnika (regulacja kąta i wysuwu), dlatego zaprojektowałem ten zamiennik.
Element zastępuje oryginalną, wtryskiwaną część i przywraca fotel do życia. Po zamontowaniu działa w 100%! Czas pokaże, jak długo wytrzyma w perspekwie kolejnych lat, ale na ten moment sprawuje się rewelacyjnie i jestem z niego bardzo zadowolony.
Wskazówki do druku:
Filament: Drukowałem używając Sunlu PETG. Gorąco zalecam PETG, ABS lub ASA ze względu na obciążenia mechaniczne, jakie przenosi ten element.
Ustawienia: Dla pewności polecam zwiększyć liczbę obrysów (ścianek) do 4-5 oraz ustawić gęstsze wypełnienie (np. 40-50% Gyroid), co usztywni konstrukcję.
Druk: Element bez problemu i bardzo dobrze drukuje się na szybkich maszynach Core X-Y.
The original mechanism in my office chair broke after 5 years of daily use. I really wanted to keep the chair fully functional (armrest angle and extension adjustment), so I designed this replacement part.
It replaces the broken original factory ratchet and brings the chair back to life. Once installed, it works 100%! I'm not sure about its long-term durability over the years yet, but right now it performs perfectly and I'm extremely satisfied with the result.
Print settings:
Filament: I printed this using Sunlu PETG. I highly recommend PETG, ABS, or ASA due to the mechanical stress this part handles.
Settings: For maximum durability, I suggest increasing the number of perimeters (walls) to 4-5 and using higher infill (e.g., 40-50% Gyroid) to make it stiffer.
Printing: Successfully and cleanly printed on a fast Core X-Y 3D printer.