Numberplate light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for a Sym Mask 125cc (same as 50cc version) will fit other scooters
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I made this originally as a cover for my existing sym mask 125cc scooter numberplate light as the original went missing but I was left with the base plate that screws onto the tail tidy.
The part fits perfectly to the original base plate - it will however still require some ingenuity i.e i added some foil tape inside to help reflect the light down to the numberplate. I also made a lens cover which i glued in place.
I think if you have some clear PLA/PETG and are able to print a clear lens and adapt this design then you can make it even better.
I just needed it for the MOT
The base plate is generic and will fit the original part. I added a slot in case screw hole placement differs.