Gothic Poison Apple With Dripping Skull Face
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place poison apple with a dripping skull face, no supports needed, plus AMS and single colour profiles.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
This poison apple is a spooky little Halloween decoration with a grinning skull face and toxic green drips oozing down to a deep red base. It prints in place with no supports, so it comes off the plate ready to display. There are two profiles, an AMS multicolour version and a single colour version, so it works whatever your printer setup. It's great for gothic shelves, Halloween tables, or anyone who likes their fruit with a bit of menace.
If you're printing the single colour version, orange gives it a lovely pumpkin-meets-apple look, and the sculpted face and drips still stand out nicely in one colour. The profiles use 0.6mm line widths, so load the settings from the profile rather than your slicer defaults. Make a little bowl of them for a Halloween party, pop one on a bookshelf, or leave one out for a guest to find. With no assembly and no supports to peel off, it's a nice easy one for beginners.
Filament Colour & Material
PLA works well. For the AMS profile, use a bright green, a deep red and a brown for the stem, as shown in the photos. For the single colour profile, orange or a vivid green both look great.
Print Settings
Print in place: Yes, no assembly
Supports: None
Layer height: 0.16mm
Infill: 15%
Wall line count: 2 or more
Line width: 0.6mm for default, initial and outer walls
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: