Eye Cup Olympus GWH10x23 Japan (MKII) 3 + 1 Variations
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Winged eye cups for the Olympus GWH10x23 eyepieces. Three sizes available plus a base for custom designs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found the first iteration of these mildly uncomfortable after some extended microscopy sessions. I've updated the design here for comfort and ease of use.
I recommend using TPU or some other softer materials for the eyecups. PETG works really well for the dust caps, and saves you some print time vs TPU. But I'm sure PLA would work just fine in this application as well.
I've included three designs, each including an accompanying contoured dust cap:
SHORT -- No wing. Just a low-profile eyecup designed for comfort and ease-of-use.
MED -- 7 mm wing height to help block stray incoming light.
TALL -- 10 mm wing height to help block stray incoming light.
BONUS:
BASE -- In case you don't like my designs, this is the base model so you can customize your own eyecup.
*Note: my design uses a 90 degree arc for the wing, plus whatever extra arc-length the fillets add.