Steam Frame Lens Adapter for Valve Index Glasses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU adapter to reuse Valve Index prescription lens inserts in the Steam Frame.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
Reuse your Valve Index prescription lens inserts in the Valve Steam Frame.
I had a pair of prescription inserts for my Valve Index (vroptiker.de) and wanted to use them in the Steam Frame while waiting for dedicated Frame inserts. This TPU adapter clamps onto the Frame's lens housing and holds the Index lens in a snap-in groove.
FEATURES
- Friction fit on the Frame lens housing – no glue, no tools, removable in seconds
- Lens keeps the same orientation it had in the Index, so the cylinder axis of astigmatism-correcting lenses stays correct
- About 1 mm air gap between the Index lens and the Frame lens – nothing touches the Frame optics
- Printed with the eye side down: no supports needed
IMPORTANT – FIT
These files are made for MY lenses: outline 44.2 x 38.7 mm, edge thickness 2.5–3.5 mm, prescription around -2.5/-3.0 dpt. Index inserts from other manufacturers can have a different shape. Print the small fit-test ring first (about 3 g) and check that your lens snaps in firmly before printing the full adapter.
PRINT SETTINGS (tested on Prusa CORE One, Prusament TPU 95A)
- TPU 95A, 0.4 mm nozzle, 0.2 mm layer height
- No supports
- 4 perimeters, 30 % gyroid infill
CREDITS
The clamp that grips the Frame lens housing is taken from Jonathan Mayer's "Steam Frame Lens Protector (TPU)" – thanks for the fit-tested geometry!
Use at your own risk – check the clearance to the Frame lens before wearing the headset.