AKG K245 Headband Fix/mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy fix/mod for your AKG K245 that has a molting headband.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This pair of headphones loves to disintegrate, and you can't buy parts for them. The original strap has a rubber band that's supposed to allow for adjustment, but because of that and the hefty weight, your ears hold up the whole thing.
I had enough of it.
This mod replaces the band with a fixed one, reusing the hardware from the factory band. The original is both glued and stitched, but easy to pry apart once you cut the seams with a blade.
Materials
Designed with PETG in mind, flexible material is a must.
Assembly
You need some 3mm long M3 heat set threaded inserts, and M3x5mm flat headed bolts. Try some 2.5" HDD/SSD bolts if you have spares, they should work!
For the strap, I used a bit from a 20mm wide ratcheting strap - but you can use any material. Padding can also be added. Cut to fit or make it (tediously) adjustable by punching more than two holes. Use longer bolts if the material is thicker than what I used.