Bosch ICON 26OE Wiper Adapter for 2023 Chevy Bolt EUV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact one-piece wiper adapter, fit-tested on a 2023 Chevy Bolt EUV with Bosch ICON 26OE blades. R37.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Bosch ICON 26OE Wiper Adapter for 2023 Chevy Bolt EUV
AnderBAKE — R37
A compact, one-piece adapter developed to fit Bosch ICON 26OE wiper blades to the newer arm attachment on a 2023 Chevrolet Bolt EUV. This release follows iterative printed fit tests and replaces the earlier two-piece adapter concept with an integrated body and flat roof.
Compatibility and test status
Intended and owner-fit-tested combination: 2023 Chevy Bolt EUV / Bosch ICON 26OE.
Other Bolt years, Bolt EV, Trax, other GM vehicles, other ICON suffixes, and different blade lengths have not been verified with this revision.
This is a community prototype. Fit development and an R37 print have been completed; long-term fatigue, weathering, retention loads, and service life have not been established.
An owner-supplied photograph shows the adapter installed on the Bolt EUV. The other listing images are renders of the exact supplied STL.
Dimensions
Feature | Nominal size |
--- | --- |
Overall length | 47.625 mm / 1 7/8 in |
Maximum width | 15.5 mm |
Overall height including button | 15.50 mm |
Side-wall height | 13 mm |
Hinge bore diameter | 7.4 mm |
Hinge center from either end | 23.8125 mm |
Hinge center above bottom | 6.5 mm |
Main inside wall gap | 10.2 mm |
Nominal upper hinge-wall thickness | 2.65 mm |
Roof thickness | 2 mm |
The interior has no rings, shoulders, or corbels. The hinge-wall entry is rounded and slightly flared. The original stepped lower exterior mounting edges are preserved; do not sand those features flat.
Printing
The STL is in millimeters and already oriented upright with its bottom on Z=0. Print at 100% scale, roof and release button up, side-wall feet down. Do not rotate it roof-down or scale it to tune the fit.
Development used black ABS on a Sovol SV08 with a 0.4 mm nozzle. The final R37 print used these settings; adapt temperatures and flow to your own filament and calibrated printer:
Setting | Development value |
--- | --- |
Layer height, including first layer | 0.15 mm |
Nozzle / bed | 250 / 95 degrees C |
Walls | 6 |
Infill | 100% rectilinear |
Top / bottom layers | 8 / 8 |
Nominal extrusion width | 0.45 mm |
Outer / inner wall speed | 20 / 30 mm/s |
First-layer / bridge speed | 15 / 20 mm/s |
Filament flow ratio | 0.95, specific to the development setup |
Part cooling | Off in the development ABS profile |
Brim / raft | None |
Supports and bridges matter. Use removable local supports beneath the original exterior lower ledges, the arm-side ceiling, and the release-button underside. Keep supports out of the hinge bores. Bridge the front roof across the narrow width between the walls; the clear span is about 10.2 mm. In OrcaSlicer, the first two roof layers used a height-range modifier with 2 walls from Z=10.95 to 11.30 mm so the bridge could anchor to the side walls. Inspect your sliced preview rather than relying on automatic supports alone.
The development supports were normal/snug, with 0.15 mm top and bottom separation, 0.35 mm XY separation, and two interface layers. Remove supports fully from the lower mounting recesses and release mechanism. These are starting settings, not a universal printer profile. A model-only 3MF is included for unit-aware import; it contains no slicer settings or support painting.
The one-part development slice estimated about 4.7 g including support and about one hour of printing, plus machine startup. ABS is the only material used in this development. Other materials require their own fit and durability checks.
Fit checks before use
Remove printing supports and inspect the part for cracks, poor layer bonding, or deformation. Confirm both blade pivots fully seat in the holes, the blade can articulate freely, and the arm retention button fully engages. Check that the adapter cannot slide out with the button engaged. Do not use it if retention is uncertain or the part binds, cracks, or loosens. A failed wiper adapter can detach a blade and damage the windshield; inspect it periodically and after severe weather.
Files
AnderBAKE-2023-Bolt-EUV-Bosch-ICON-26OE-R37.stl: exact final R37 print mesh; millimeters.AnderBAKE-2023-Bolt-EUV-Bosch-ICON-26OE-R37.3mf: the same geometry with units and public metadata; model only.PRINTING.md: printing notes.LICENSE.txtandATTRIBUTION.md: license notice and source credits.model-specifications.json: dimensions and geometry verification summary.images/: an installed-fit photograph and exact-model CAD renders.SHA256SUMS.txt: release file checksums.
The STL is one closed connected mesh with 9,708 triangles. The 3MF is a mesh interchange file, not an editable parametric CAD history. Printer-specific G-code is not included.
Credits and license
This is a remix, released free under Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0): https://creativecommons.org/licenses/by-nc/4.0/
Xephisol — Rain-X Latitude Wiper Blade Adapter - 2024 Chevy Trax, Other GM Models, the source of the Chevy arm interface. Original license: CC BY-NC 4.0. https://www.printables.com/model/1304266-rain-x-latitude-wiper-blade-adapter-2024-chevy-tra
LavXdotHU — Bosch Aerotwin Top-lock LHD adapter, an early dimensional reference for the Bosch interface. Original license: CC0 1.0. https://www.thingiverse.com/thing:5824622
AnderBAKE — fit development and this compact, integrated R37 adaptation for the Bolt EUV / ICON 26OE combination. CAD revisions and documentation were developed with AI-assisted scripting under the creator's direction, with iterative physical fit checks.
Changes include a one-piece body, a shorter overall length, relocated and resized hinge holes, a revised wall gap, thicker hinge walls, a flat roof, rounded transitions, and removal of the original separate pivot mechanism, logos, pins, rings, and corbels. The original arm-side lower recesses are retained.
Credit the creators, link the source models and license, and identify your changes when sharing a remix. Commercial use is not permitted under this license. Bosch, Chevrolet, GM, Rain-X, and the original designers do not endorse this adaptation. Brand names identify compatibility and source provenance.
