1 / 8
Alocasia Corm Propagation Station 2cl Shot Cups — zdjęcie 1
1 / 8

Alocasia Corm Propagation Station 2cl Shot Cups

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printable propagation station for 15 Alocasia corms / rhizomes using 2cl shot cups, raisers, and closed humidity lids

Ocena
0 / 5
Polubienia
5
Pobrania
17
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this propagation station to grow Alocasia corms / rhizomes in a clean, compact, and organized way.

The station holds 15 individual 2cl shot cups.
Each cup uses a raiser insert so the corm sits above the water instead of directly in it. A closed lid helps maintain higher humidity inside the cup, creating a simple and effective propagation environment.

This makes it easy to grow multiple corms at once, keep them separated, and monitor them individually.

Why this design?

  • propagate many Alocasia corms in a compact setup

  • every corm is kept separate

  • no direct water contact with the corm

  • higher humidity thanks to the lids

  • easy to monitor the water level

  • much cleaner and more organized than using many loose cups

Compatible cups

This model is designed for standard 2cl disposable plastic shot cups with the following dimensions:

  • top diameter: 38.5 mm

  • height: 40.7 mm

  • bottom diameter: 27.1 mm

⚠ Important note:
Disposable shot cups may vary slightly depending on the manufacturer. Please check your cup dimensions before printing to ensure proper fit.

Included files

  • BasePlate / holder for 15 shot cups

  • Cover / lid for the shot cups

  • Raiser for the corms (one raiser per cup)

  • Legs / feet
    Both feet are identical, so the same part is printed 2x.

Required hardware

  • 4x M3 screws

  • recommended length: at least 8–10 mm

The holes in the feet are intentionally slightly undersized so the screw threads can cut into the plastic by themselves.

Print settings

The whole project was printed in ABS, but other materials should work as well.

Recommended print settings:

  • Nozzle: 0.4 mm

  • Layer height: 0.2 mm

  • Walls: 2–3

  • Infill: 35%

  • Support: only needed for the feet

How it works

Add a small amount of water to the cup, insert the raiser, place the corm on top, and close it with the lid.
This keeps the corm above the water while maintaining a humid microclimate inside the cup.

If you find this model useful, I’d really appreciate a like, download, or posted make. Happy growing!

Tagi