1 / 4
Ender 3 V2 Bed Leveling Wheels w/ Integrated Locking Mechanism — zdjęcie 1
1 / 4

Ender 3 V2 Bed Leveling Wheels w/ Integrated Locking Mechanism

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement bed leveling wheels with integrated locking mechanism for Ender 3 v2.

Ocena
5 / 5
Polubienia
3
Pobrania
6
Wydruki
2
Wyświetlenia
43
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Details:

Replacement bed leveling wheels with integrated locking mechanism for Ender 3 v2. Wheels ideally remain set indefinitely. Wheel has 70 teeth to match to match the pitch of the original wheels. Also included an optional B mount to support cable from bed heater.

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender 3v2

  • Rafts:

    No

  • Supports:

    No

  • Resolution:

    0.2

  • Infill:

    30%

  • Perimeters:

    3-4

  • Filament material:

    PLA

What to print
  • 4x Wheel

  • 2x Mount A

  • 2x Mount B

    • optional print 1 Mount B w/ Cable Holder and 1 regular Mount B to support cable from bed heater.

Required Hardware
  • 4x M4 nuts 6.85mm.

Modifications might be required if your nuts are larger than mine(giggity)
Please read the "Customizing" section for more info.

Warning

The mounts should easily slide over screw threads. DO NOT FORCE THEM if they don't fit. They should slide smoothly over the screws.  Forcing them on may not allow your bed springs to decompress and become difficult to remove.

Installation

1) Remove the stock wheels: I recommend gradually unscrewing 2 screws at a time alternating (i.e. front left & back right simultaneously, then alternating to front right & back left)  so that yo do not warp your bed heater.

2) Slide the mounts on and screw the new wheels on.

  • The elevated part of the mount should wrap perfectly around the curve of the bed plate, if it doesn't then it's the wrong mount for that corner.

    • FL: Mount A

    • FR: mount B

    • RR: Mount A

    • RL: Mount B

Tagi