Rail Weights for Arca Swiss bellow bottle rail in benchrest airgun.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rail Weights lead box for a Saber Tactical Arca-Swiss below rail in benchrest airgun.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have an Arca rail on my FX Impact and need more weight for benchrest shooting. It is an adaptation of an Saber Tactical rail bellow the bottle Arca-Swiss rail that incorporates a compartment holding about 300 to 400 grams of lead (depending on the granularity of the grains used). You can mount up to three of these units beneath the rail.
To achieve a polished finish, you will need an M6 bolt and nut, as well as small M3 screws with springs (see the figures). I secure the lead weight with epoxy so it doesn't rattle during transport.
Printing recommendations: Use 50% Gyroid infill. For the body and jaw, use 6 perimeter layers; for the lead box, use 10 top layers.
I used PLA-CL, but PLA+ would be fine.