ESP32 DevKitC V4 Case - Compact Snap-Fit Enclosure with Ventilation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for ESP32 DevKitC V4 (30-pin). Snap-fit, fully ventilated, USB access, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Protective enclosure designed specifically for the ESP32 DevKitC V4 - 30-pin version with wide body.
From my Maker Enclosure Collection - compact, minimal and functional. Keeps your IoT project protected without blocking the WiFi/BLE signal.
Features:
- Perfect fit for ESP32 DevKitC V4 (30-pin, 54x28mm board)
- Internal rails to hold board securely - no screws needed
- Snap-fit lid with side clips
- Ventilation on all sides and top for cooling
- Precise cutout for micro-USB port
- 2-part ultra-compact design
Optimized for FDM - prints in under 1 hour.
Print Settings:
Material: PLA or PETG (PETG recommended for IoT projects)
- Layer height: 0.2mm
- Walls: 3 perimeters
- Infill: 15-20%
- Supports: NO
- Orientation: Both parts flat side down as in render
If fit is too tight for your printer, apply Horizontal Expansion -0.05mm.
Part of The Maker Enclosure Collection - check my profile for Arduino, FPGA and more.