PiFi - Raspberry Pi and touch display streaming box Dragonfly DAC moOde audio
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure that looks like a premium HiFi amp or streamer that houses a Pi and the touchscreen
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Open Community License v1.1 + General Attribution v1
I always wanted a sleek looking HiFi streamer but without the price tag. So I took a normal sized Raspberry Pi, a Dragonfly red DAC (but any other DAC likely fits) and the Raspberry Pi touch display 2 - 7 inch - 720x1280 and made this enclosure. Requires CNCkitchen (or other) heatinserts to mount the pi and the feet.
I recommend printing the main body of the enclosure top side down in PETG on the textured sheet for a nice finish on the top. The wedge is there to secure the display in place without having to glue it (I added some hotglue anyway). The Pi is mounted on 4 poles with heatinserts and then screws. Also add heatinserts for the 4 feet. Once you have your components inside and cables connected, insert the floor. The feet then screw in and hold the floor in place.
My Pi runs MoOde audio. Enjoy!
There is an optional switch cover for a momentary switch that I glued behind enclosure later to control the Pi via GPIO.