1 / 7
Mini Coolant Overflow Tank Cap R50 R52 — zdjęcie 1
1 / 7

Mini Coolant Overflow Tank Cap R50 R52

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement Non-Pressurized Coolant Overflow Tank Cap that replaces the expensive and poor existing part.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Please Print in the orientation as depicted.

Please install from the left or from the right as the lower clip is designed to slot under the rear snap mount.

I selected Prusa Polycarbonate Blend for this application. 

Settings: 100% Infill; Concentric Fill Pattern; 0.4 Nozzle; 0.2 Layers Balanced; Organic Supports w/ Brim; Reduced External Perimeter Speed to 50 mm/s.

WARNING: This is an experimental part that will be installed in a hot engine bay.  While I have taken every precaution to ensure this will be successful and the overflow tank is not under pressure; this material or especially a lower end material might deform under the temperature in the engine bay which could cause issues to your vehicle's engine. By downloading and using this part you are accepting the risks inherent in printing engine compartment parts which could lead to engine problems due to the failure of the material. Please ensure you are printing this part in material that can withstand this additional temperature like Polycarbonate, Nylon, or ABS/ASA.

Tagi