1 / 4
Lian Li O11 Dynamic (O11D) - Dual 80mm Fan Exhaust Duct — zdjęcie 1
1 / 4

Lian Li O11 Dynamic (O11D) - Dual 80mm Fan Exhaust Duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet another duct to mount two 80mm fans to the rear exhaust of the classic Lian Li O11 Dynamic.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution
The Problem

The O11D's rear grill wasn't designed for fan mounting. Attaching fans directly to the metal is inconvenient, and the rear panel ends up blocking a significant portion of the airflow. This duct solves that by providing proper mounting points and funneling the air from two 80mm fans efficiently through the 67x144mm opening without restriction.

Features:
  • I tried to implement Velocity Stack Design: The inner channel smoothly transitions from the fan blades to the rectangular exhaust. This eliminates dead air pockets, reducing turbulence and noise.

  • No Brass Inserts Needed: The mounting corners are solid plastic. Standard thick fan screws can be driven directly into them without splitting the layers.

Print Settings:
  • Material: PETG, ABS, or ASA. I prefer ABS.

  • Perimeters / Walls: 4–5 minimum. This ensures the fan screws bite into solid plastic walls rather than hollow infill.

  • Infill: 15–20%.

  • Supports: None (Print flat face down).

Hardware Required:
  • 2x 80mm fans

  • 8x Standard fan screws

  • 4x M3 or M4 self tapping screws

Tagi