Lian Li O11 Dynamic (O11D) - Dual 80mm Fan Exhaust Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another duct to mount two 80mm fans to the rear exhaust of the classic Lian Li O11 Dynamic.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
The Problem
The O11D's rear grill wasn't designed for fan mounting. Attaching fans directly to the metal is inconvenient, and the rear panel ends up blocking a significant portion of the airflow. This duct solves that by providing proper mounting points and funneling the air from two 80mm fans efficiently through the 67x144mm opening without restriction.
Features:
I tried to implement Velocity Stack Design: The inner channel smoothly transitions from the fan blades to the rectangular exhaust. This eliminates dead air pockets, reducing turbulence and noise.
No Brass Inserts Needed: The mounting corners are solid plastic. Standard thick fan screws can be driven directly into them without splitting the layers.
Print Settings:
Material: PETG, ABS, or ASA. I prefer ABS.
Perimeters / Walls: 4–5 minimum. This ensures the fan screws bite into solid plastic walls rather than hollow infill.
Infill: 15–20%.
Supports: None (Print flat face down).
Hardware Required:
2x 80mm fans
8x Standard fan screws
4x M3 or M4 self tapping screws
