x870e Taichi Lite NVME 40mm fan bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket that attaches to the nvme m2_1 slot and sits on top of your gpu.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a bracket that fits on the nvme slot 1 of the taichi lite x870e motherboard. It allows for a fan to direct airflow on and around the nvme heatsink. I saw an improvement of around 4-6c across the board. mind you i have a water cooled system with heat being directed into the system as some radiators bring air in vs out. this didn't make air flow insane, it just brought the limits down to keep the nvme in a reasonable temperature. I have not upgraded the thermal pads at all. - if i do, i will add an update on temps.
the whole bracket acts as a release button so you can remove the nvme drive. just push the entire bracket left and you press on the release button.
I recommend rotating a few times to print with the least filament. For me, this was with the main open side down. (the side that touches the motherboard.)