Halloween Goth Bat Architectural Shelf Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Halloween Goth Bat Architectural Shelf Support
- Ocena
- 0 / 5
- Polubienia
- 348
- Pobrania
- 833
- Wydruki
- 0
- Wyświetlenia
- 4429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Bring a touch of dark academia, Victorian gothic design, and Halloween decor into your home with this highly detailed Gothic Bat Corbel. Designed as an ornate architectural wall bracket featuring a carved bat gargoyle embedded within pointed arch tracery, this model is perfect for micro-display shelves, gothic interior styling, bookends, or tabletop decor.
Optimized specifically for FDM 3D printing with fine detail retention and easy-to-remove tree supports.
Style: Gothic Revival / Dark Academia / Halloween Decor / Gargoyle
Mounting: Designed with a flat back plate for seamless wall or corner placement.
Support Friendly: Pre-sliced with custom tree support settings for effortless cleanup on detailed features.
Setting Category | Setting Parameter | Optimized Profile Value |
Supports | Enable Support | Checked (Tree Auto) |
| Threshold Angle | 20° |
| Style | Default |
| Remove Small Overhangs | Checked |
Support Advanced | Top Z Distance | 0.18 mm |
| Bottom Z Distance | 0.12 mm |
| Base Pattern | Hollow |
| Base Pattern Spacing | 2.5 mm |
| Initial Layer Expansion | -1 mm |
| Initial Layer Density | 90% |
Bed Adhesion | Brim Type | Outer Brim Only |
| Brim Width | 4 mm |
| Brim-Object Gap | 0.1 mm |
Quality & Seams | Seam Position | Back |
Quality of the print in the picture is like that because i used a bad Wood PLA and the print was to small. Quality of the print will be better for larger prints, scale it up at least to 10cm