SSE18 Side Battery Holder with Replaceable Armor Panels, Rails, Sling Mount and Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LiPo battery holder for the SSE18 with replaceable armor panels, extra rails, sling mount and grip options.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Open Community License v1.1 + General Attribution v1
SSE18 Side Battery Holder
Left-side battery holder for the Novritsch SSE18 that fits a larger 2S 1500mAh LiPo with T-plug (like this one). It clamps onto the gun's short Picatinny rail section.
Features
Replaceable armor panels: reprint a panel instead of the whole holder when it gets shot.
Optional rails on the bottom, side and top, since it uses up the gun's only rail.
Optional front sling mount: pairs with the rear point from my Enhanced Stock kit.
Optional grip: 2 sizes, 2 mounting angles.
Required modification
Drill a hole in the metal slide to route the power lead (see the included image for the position). You also need an adapter from the gun's power connector to the battery, or solder your own (what I did).
Drill the hole in this location or further to the right
Hardware (buy here)
12x M3x8 or M3x9: armor panels
4x M3x12: grip construction
4x M3x8-12: mounting the grip
4x M3x8-12: mounting the sling mount
Printing instructions
Print all models in the given orientation for strength.
Settings | Parts |
|---|---|
2-3 walls, ~30% infill | Grip_thick, Grip_thin, Rail_55mm_slantedSide, rail65mm_bottom, Rail95mm_side_top |
4-5 walls, 100% infill | sling_mount, GripMount_Straight, GripMount_angled, Battery_Holder |
2 walls, 100% infill | armor_front, armor_front_silencer, armor_side, armor_top, Locking_Pin |
Safety
LiPos are a fire hazard: use a LiPo-safe bag for charging, never charge unattended, and retire damaged or puffed batteries. Check polarity before connecting. Drilling the slide is permanent and at your own risk.
AND ONLY USE THIS IF YOU ARE CONFIDENT YOURS CAN WITHSTAND GETTING SHOT
Compatible with:
More Airsoft/Replica Stuff
Not affiliated with Novritsch and they probably wouldn't like this.
source of the rails: https://www.thingiverse.com/thing:3481080