Snap-fit Cap for Qidi Box Desiccant Vessel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple snap-fit Cap for Qidi Box Desiccant Vessel
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I am quite satisfied with the result achieved so I decided to publish this simple snap-fit cap for Qidi Box desiccant vessel.
I have published 4 versions, I have tested only the bigger one, but all of them have the same snapping mechanism, so they only change only for the upper grabbing part.
The cap should still be able to hold the desiccant when the vessel is upside down, as not all the weight goes on the cap.
You must print on its side with supports to get the strength for the latching mechanism as shown in the photo.
If you have requests or suggestions leave a comment.