TP-Link Archer AX23 AX1800 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall mount for the TP-Link Archer AX23 AX1800 wireless router
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Wall mount for the TP-Link Archer AX23 AX1800 wireless router, with countersunk screw holes (~8mm in diameter at the widest ~4mm at the thinnest). Lightweight yet sturdy. Not perfect but works as intended. Nubs are tall enough to allow for some non countersunk screws to work as well.
I've attached the main model and two freecad project files, one for the full mount and another one that's just a bar with the two nubs of the correct size at the correct distance to slide in the wall mount slots, you can use this one to build your own shape around.
Print settings I used (probably doesn't matter too much):
Wall loops: 6
Infill density: 50%
Didn't change any settings for print quality since this is going between a wall and a router, so it really doesn't matter how it looks.
You can probably start with 2 wall loops and like 20% infill and see if it's strong enough for you. I used extra wall loops hoping to give some strength to the thin parts around screw holes and increased infill to make the whole thing more rigid. Again, probably doesn't matter much, this router is pretty lightweight.
Printed mine using some Anycubic PLA+ but I'm guessing regular PLA will work just as great.