NVIDIA 5080 Anti-Sag Bracket [MSI NVIDIA 5080 Trio OC Edition]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An anti-sag bracket specially designed for the MSI 5080 GPU.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A custom bracket designed for the MSI NVIDIA 5080 Trio OC Edition to prevent sagging. There are two models availible of both the leg and the main bracket. One of the legs is just a simple circle and the other has a wider base to prevent it from falling. One of the main brackets is just simple and plain while the other one has some cutouts and styling which might help with the airflow a bit. You can mix the parts however you want, the threads are the same size.
Printed with 0.1mm layer height and 15% infill to lower center of gravity and prevent it from falling. Manual supports on areas that need it, not on the threads.
The locking nut threads on the leg first and then screw in the leg into the main bracket. After you have adjusted to your preferred height use the locking nut to prevent any adjustments.
Height range from 70-120mm