1 / 8
E-ink tag for wood, MDF and OSB – press-fit socket and marking template (Pingente) — zdjęcie 1
1 / 8

E-ink tag for wood, MDF and OSB – press-fit socket and marking template (Pingente)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D-printed socket and marking template to press-fit a Bluetooth e-ink tag into wood, MDF or OSB.

Ocena
0 / 5
Polubienia
3
Pobrania
3
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Put a Bluetooth e-ink tag into wood, MDF, MDP or OSB.

This is a 3D-printed socket that press-fits into a rectangular through-hole in a board, plus the marking template to lay out that hole. The board holds the socket by friction: no glue, no screws. The tag snaps into the socket from the front and sits flush with it, and comes out the same way to change the coin cells. For furniture, door signs, shelves, workshop boards and signage. Tested in wood: printed, press-fitted into a real board, and it works.

You need the tag and the free Pingente app. Pingente does not sell hardware: you buy the tag wherever you like (links below), print the socket, and the app turns the tag into a tiny screen you change from your phone.

WHAT THE TAG BECOMES

The tag is a small paper-like e-ink display that runs on two CR2450 coin cells and keeps its image with no power. With the Pingente app (Android) it shows weather, countdowns, lists, due dates, your photos, handwritten notes, Wi-Fi and contact QR codes, the Moon, the fact of the day and much more.

  • Free faces, no activation: Note, Wi-Fi QR, Art, Postcard, Motivation, Fact of the day, Verse of the day, Moon and Alert.

  • Every other face unlocks with the tag's permanent activation: US$ 1.99, paid once per tag, no subscription.

  • No account, no password, no cloud.

  • Android now; iOS later.

Get the app: https://play.google.com/store/apps/details?id=app.pingente

More: https://pingente.app

WHAT IS IN THIS MODEL

One folder per tag, three files in each:

  • WOOD socket: the tag socket with a 6 mm front flange that rests on the face of the board, and herringbone friction teeth on its four outer walls (gentle ramp towards the back, so it goes in easily; straight face towards the front, so it resists coming out).

  • WOOD template: the marking template, a 2.4 mm flat frame.

  • WOOD negative: the hole as a solid with square corners, for CAD or CNC.

Sizes:

  • Gicisky 2.1" (black/white/red): socket 86 × 50 mm over the flange, 13.6 mm deep; hole 74 × 38 mm; template 86.4 × 50.4 mm

  • PANDA 2.13" (black/white/red): socket 86 × 52 mm, 13.5 mm deep; hole 74 × 40 mm; template 86.4 × 52.4 mm

  • Gicisky 2.9" (black/white/red/yellow): socket 104 × 58 mm, 13.85 mm deep; hole 92 × 46 mm; template 104.4 × 58.4 mm

  • WOLINK 2.9" (black/white/red): socket 106 × 58 mm, 9.3 mm deep; hole 94 × 46 mm; template 106.4 × 58.4 mm

HOW TO CUT THE HOLE AND FIT IT

  1. Print the WOOD socket and the template with the settings below.

  2. Lay the template on the board. The small holes in the middle of each side mark the centre lines: align them with your layout.

  3. Trace inside the window: that is the through-hole, with square corners. Drill a starter hole inside the outline, cut with a jigsaw (or a router in straight lines) and square the corners with a file or a chisel.

  4. Optional, for a flush flange: trace around the outside of the template and rout a 2 mm deep rebate (the flange is 2 mm thick). Its corners have an 8 mm radius, so any router bit up to 16 mm in diameter follows them.

  5. Press the socket in from the front until the flange touches the board. Then snap the tag in from the front.

A board thinner than the socket (11.6 mm for the Gicisky 2.1", 11.5 mm for the PANDA 2.13", 11.85 mm for the Gicisky 2.9", 7.3 mm for the WOLINK 2.9", below the flange) leaves the socket sticking out at the back. That is expected.

PRINT SETTINGS

  • 0.4 mm nozzle, 0.2 mm layers

  • 3 walls, 5 top and 5 bottom layers, 15% infill (grid or gyroid, it does not matter)

  • No supports. Print the socket front face down, with the flange on the plate (the print profiles already come that way); the template prints flat.

  • PLA or PETG.

Three walls because the tag pocket and the friction teeth are calibrated with them. OrcaSlicer and Bambu Studio tip: leave "Top shell thickness" and "Bottom shell thickness" (in mm) at 0, so the layer count above is what counts.

WHAT TO BUY

The tag (pick the Bluetooth single-tag, app version; base-station versions do not work with the app):

Notice: Pingente does not sell hardware, only the app. The tag comes from an independent manufacturer and you buy it wherever you like. Warranty is the seller's, and checking whether the tag is approved for use in your country is up to the buyer.

PUT THE TAG IN YOUR OWN 3D PRINTS

Designing a part to print instead of cutting wood? The embed module (the plain socket plus its negative for a slicer boolean) is a separate model: https://www.printables.com/model/1870426 · step by step: https://pingente.app/cases/#modulo

LICENSE

CC BY 4.0. Print it, remix it and sell the printed parts or what you build with them, crediting "Pingente (pingente.app)". Please tag your remix with pingente.

App: https://play.google.com/store/apps/details?id=app.pingente

Site: https://pingente.app · Cases and print guide: https://pingente.app/cases/

Pingente, by Pantekton · pantekton.app

Tagi