1 / 2
Samsung Galaxy S26 Ultra & Galaxy Watch Ultra – 2-in-1 Wireless Charging Stand — zdjęcie 1
1 / 2

Samsung Galaxy S26 Ultra & Galaxy Watch Ultra – 2-in-1 Wireless Charging Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimalist 2-in-1 wireless charging stand for Samsung Galaxy S26 Ultra and Galaxy Watch Ultra. Easy to 3D print.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Samsung Galaxy S26 Ultra & Galaxy Watch Ultra – 2-in-1 Charging Station

A modern, minimalist 2-in-1 charging station designed for the Samsung Galaxy S26 Ultra and Samsung Galaxy Watch Ultra.

This 3D printable stand combines dedicated spaces for your smartphone and smartwatch in a single functional design. Perfect for keeping your desk, nightstand or workspace organized.

Key Features

  • 2-in-1 design: Holds a smartphone and smartwatch together.

  • Wireless charging ready: Designed for separate Qi-compatible phone and dedicated Galaxy Watch charging modules.

  • Angled smartphone holder: Convenient viewing angle for notifications and everyday use.

  • Space-saving design: Combines two charging locations into one stand.

  • Minimalist appearance: Suitable for modern desk and bedside setups.

  • Functional 3D print: Designed as a practical everyday accessory.

Compatibility

Designed for:

  • Samsung Galaxy S26 Ultra

  • Samsung Galaxy Watch Ultra series

Other devices and charging modules have not been tested.

Model Dimensions

  • Width: approximately 190 mm

  • Depth: approximately 86.8 mm

  • Height: approximately 114.7 mm

Recommended Print Settings

Setting

Recommendation

Printing technology

FDM / FFF

Material

PLA or PETG

Nozzle diameter

0.4 mm

Layer height

0.20 mm

Infill

20% Gyroid

Walls / Perimeters

4

Top / Bottom layers

5 / 5

Print scale

100%

Supports

As required by orientation

Brim

Optional, 5 mm

These settings are recommendations and may require adjustment depending on the printer, filament and print orientation.

Required Accessories

  • Compatible Qi wireless charging module for the smartphone

  • Dedicated compatible Galaxy Watch charging module

  • Appropriate USB power supply and cables

Important: Charging electronics, cables and power adapters are not included in the STL download.

Please check the dimensions and compatibility of your charging modules before printing.

Additional Information

  • Download format: STL

  • Model type: Functional accessory

  • Assembly: Installation of charging electronics required

  • Intended use: Indoor desktop or bedside charging station

For long-term use, PETG is a good option where additional temperature resistance is desirable. Make sure charging modules have appropriate ventilation and do not overheat.

Share Your Print!

If you print this model, please share a photo of your finished setup.

Feedback, ratings and suggestions for future improvements are always appreciated.

Happy printing!

Tagi