High Resolution Resin Print Head For RepRapMicron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts to attach UV LED and 9/125 !Optical fibre to a μRepRap allowing 9μm resolution in 3D printer resin.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
There are two parts to this: The Optic Probe Holder which attaches to the RepRapMicron Z Axis Arm, and an adaptor that holds a 3W UV LED module to a standard simplex 9/125 fibre optic cable. A duplex lead may be halved with a hacksaw. The author is using clear eSun Standard Resin.
Full instructions and links to source, PrusaSlicer filters, operation, RepRapMicron etc. live on https://github.com/VikOlliver/RepRapMicron/wiki/PIKA-UV-Head
In theory you could fit it to other 3D printers or CNCs, even a Prusa, though the UV LED does want half an amp so you might need a MOSFET driver (Keyes do some modules for those not into DIY circuits).
Images show the fitted head, UV Module, and a 0.6mm violin, and the working UV Module with separate LEDs, assembled with 2 of M3 x 20 screws with washers and nuts.