High Resolution Resin Print Head For RepRapMicron
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts to attach UV LED and 9/125 !Optical fibre to a μRepRap allowing 9μm resolution in 3D printer resin.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
There are two parts to this: The Optic Probe Holder which attaches to the RepRapMicron Z Axis Arm, and an adaptor that holds a 3W UV LED module to a standard simplex 9/125 fibre optic cable. A duplex lead may be halved with a hacksaw. The author is using clear eSun Standard Resin.
Full instructions and links to source, PrusaSlicer filters, operation, RepRapMicron etc. live on https://github.com/VikOlliver/RepRapMicron/wiki/PIKA-UV-Head
In theory you could fit it to other 3D printers or CNCs, even a Prusa, though the UV LED does want half an amp so you might need a MOSFET driver (Keyes do some modules for those not into DIY circuits).
Images show the fitted head, UV Module, and a 0.6mm violin, and the working UV Module with separate LEDs, assembled with 2 of M3 x 20 screws with washers and nuts.