Zipper Pull - Hangyodon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boring zippers no more! Expanding the Zipper Pull collection - Hangyodon!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Items you need:
2 x “4mm x 30cm” paracord.
*4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
*2 x “12mm” wiggly eyes.
Super glue (for components and magnets).
*If you do not have wiggly eyes and magnets, I have included a 3D printed option - Eyes (black and white part) & a Connector.
Suggested print settings for the Main Body:
Layer height 0.2mm.
Infill 30%.
Position the print in a way that the joining face is facing downwards.
No supports needed.
Suggested print settings for the Fins & Mouth:
Layer height 0.2mm.
Infill 15%.
No supports needed.
Assembly
Attach the components according to the reference pictures.
For more interesting zipper pull charms, be sure to track this tag (Zipperrific).
We've even conjured up a little home for our zipper pulls – because they deserve a stylish rest when they're not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They're not just zipper pulls; they're your new tiny, table-top pals!
