Portable Master Klipper Controller - PiTFT70 & PiUPS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Portable klipper controller for your klipper-ized printers. Designed around a BTT PiTFT70, Pi4b & a 18650 based Pi UPS
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a portable master klipper controller for my printers so I designed this around a BTT PiTFT70, Pi4b & a 18650 based Pi UPS. During the design process I luckily stumbled across the below video detailing exactly how I wanted to set this up. Thank you to Chris Riley for the awesome and informative video on the set up of a portable klipper screen.
Hardware used for this build:
Raspberry Pi 4b - use whatever ram variant you have available. Should run just fine on even just 1 GB pi since this is just klipper screen running.
PiUPS by Geekworm - https://www.amazon.com/dp/B087FXLZZH?
BTT PiTFT70 - https://www.amazon.com/BIGTREETECH-Raspberry-Controller-Capacitive-165X100mm/dp/B09794LDY2/ref=sr_1_1?
Barrel Jack for Power input to the UPS/Pi - https://www.amazon.com/Threaded-Adapter-Connector-Dustproof-lkelyonewy/dp/B091PS6XQ4/ref=sr_1_15?
22mm Power Button - https://www.amazon.com/Gebildet-Momentary-Terminals-Stainless-Waterproof/dp/B0BCF2CWG6/ref=sr_1_16?
Video by Chris's Basement for flashing and config file setup: