1 / 1
1" square tube bracket with gusset to mount plywood to tube structure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to mount a piece of plywood to a 1" x 1" sq tu frameso i made this and it didnt break so i thought i'd share.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Bracket used to mount a piece of 1/2" plywood to a metal frame that had 1" square tubing. the width dimnesion is 1.03 and the height dimension is 0.97" so it should fit over well and pull slightly to increase clamping.
I printed with the gusset down and the hat on edge. PETG, 60% rect. infill, 3 layer walls.
Mounts with (2) #6 screws.
I mounted a 4x4 sheet to a 24" wide frame section and it was in the wind all day and didnt break.