Stackable Drawer Box with Mesh Floor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable two-drawer box with a mesh floor, great for breeding mealworms: eggs fall through to the lower drawer.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I started breeding mealworm beetles and needed two drawers stacked on top of each other. The top drawer has a mesh floor: the beetles lay their eggs, and the eggs fall through into the bottom drawer. This keeps the adults away from the hatched larvae, because when food runs short, beetles can eat their own offspring.
I wanted a container that was compact but a bit taller than usual, and I couldn’t find one, so I designed it myself. I made it for my own use, but maybe someone else will find it useful too!
Features
Two drawers that stack on top of each other
Mesh floor in the top drawer: eggs fall down, beetles stay up
Vented lid
Cut-out handles for easy pulling
Compact size: 13 cm wide, 10.14 cm tall
Print settings
Printer: QIDI, PETG, 0.4 mm nozzle, 0.2 mm layer height
Perimeters (walls): 5 (required)
Top drawer infill: 20%, rectilinear (you can change it)
Seam position: rear
Supports: enabled, hybrid
Use your own tuned profile as a base. PETG worked well for me, but feel free to use another filament.
