Transportable all in one modular Skadis and 1/4 peg board wall tool holder.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's an all-in-one modular tool holder which can hold almost all tools made to work with 1/4 inch and skadis pegboards.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Standard Digital File License
It is a modular transportable mountable all in one tool storage thing. It can be mounted onto both 1/4 inch peg boards, and Skadis. You can slide it off of the pegs to then insert support legs and set it on a table without any screw drivers being shoved out. There are individual pieces that you can connect so you can add whatever you need to hold your things and you can only use what you want. Where would need to use supports go to the printfins.com and it will make efficient fins supports for you. I have versions already with fins to use if you want.
You can use the screw driver holders and the wrench holders to hold the supports, I also keep the front legs in because it is hard to take them of, and they don't take up almost any extra space. Only use pegs if you are not putting allot of tools on, they are not that strong. The amount I put on mine is a little more than the max. If you are putting allot on use your own metal hooks. Make sure you print the pegs at 100 infill density. Most things at 40% infill or more.