Liczymy pasujące modele…
Modeled myself in fusion 360 using the gridfinity design. designed around the Starrett part number 234a-6 rods. Fits in short Kennedy toolbox drawers. Please like, follow, rate and upload your makes.
A 4x2 gridfinity bin for the Moore & Write internal bore 2 point micrometer
Here is a mini keychain Micrometer for the great machinists out there who struggle to explain what it is we do exactly to the everyday people. If you are not a simple machinist you can print this for that machinist in your life and watch…
Could not find one for this size so designed one.
I printed mine in PETG on my A1 printer sans supports on both pieces. Be careful you don't accidentally print the cover wrong side up by mistake in which case you would need to enable supports. You will also need a 100 mm long dowel in…
Micrometer stand NEW 24 Aug 2023 Published new model with some improvements - Better and faster print https://www.printables.com/model/562157-micrometer-stand derivative of the nice design of Wehrenseb Changes: wider base so it doesn't…
I made a 3D printed wall mount for the ‘precision’ micrometer iI got from Lidl. Now my low budget digital caliper and micrometer can hang side by side in my workshop…. I taped my version with double sided tape to the side of a cupboard,…
GRIDFINITY MITUTOYO MICROMETER TRAY 25-50MM PT 293-612 3x5 INC CAD MODEL
Gridfinity tray for iGaging 1" tubing wall micrometer
To build the model, you will need: - Nut M6 - 1 piece; - Bolt M6*55 - 1 piece. The nut is inserted into the window in the jaw, the bolt is inserted into the hand wheel and threaded through the bed. Pins can be used to attach the frame, or…
3D Model of a Etalon micrometer, used to design a box to store it. Want to support me? => Have a look at my USB power supply mod (5V/1A) for Prusa MK4(S)/3.5(S)/MK3(S)(+) and Prusa XL, perfect for powering Buddy3D cameras or similar:…
Replacement ratchet knob for Mitutoyo micrometer. Use 0.3 nozzle or smaller and reduce outlines to a single outline for easier printing. Or, use Arachne settings to achieve thin extrusions.
I got this micrometer at an auction with several other tools. Then discovered it did not have a cover for the battery compartment. Kind of a pain having to use one finger to hold the battery in place every time I need to measure…
A tool I created to be able to measure the various magnets I'm starting to incorporate in my prints. Some are N52, while others of the same size are probably N48 so I wanted to be able to figure out the difference, and also to decide…
A Gridfinity 4x2x4 holder for generic micrometers. I remixed an existing model in which my micrometer from Parkside wouldn't fit properly, so it's the original but only resized. Hopefully it should fit other generic micrometers, but it…
Battery cover for my mitutoyo digital micrometer as mine was lost. Print Settings Printer: FLSun I3 Rafts: No **Supports:** No Resolution: .1 or less **Infill:** 50 Notes: small threads on this part, sometimes hard to print. Category:…
I designed this holder for my Orion Micrometer. The part is made to fit the Ikea Pax Gridline from @PRINTER (https://www.printables.com/model/886353-grid-line-for-ikea-pax)
Crossed Roller Guided Manual Motion Platform by JLCMC JLCMC automation parts Industrial Automation and Manufacturing-Focused Online Supply Chain at JLCMC jlcmc.com offers different types of automation spare parts for any specifications…
Crossed Roller Guided Manual Motion Platform by JLCMC JLCMC automation parts Industrial Automation and Manufacturing-Focused Online Supply Chain at JLCMC jlcmc.com offers different types of automation spare parts for any specifications…
Crossed Roller Guided Manual Motion Platform by JLCMC JLCMC automation parts Industrial Automation and Manufacturing-Focused Online Supply Chain at JLCMC jlcmc.com offers different types of automation spare parts for any specifications…
Crossed Roller Guided Manual Motion Platform by JLCMC JLCMC automation parts Industrial Automation and Manufacturing-Focused Online Supply Chain at JLCMC jlcmc.com offers different types of automation spare parts for any specifications…
This is a parametric model of a case I designed to fit my micrometer in a gridfinity grid. The model was created in FreeCAD 1.0 with the awesome Gridfinity Workbench , version 0.9.7. While it started out fully parametric, I got a bit lazy…
Printed in PLA to perfectly fit my Mitutoyo digital micrometer model 293-340. Allows safe measurement of delicate watch parts like pivots, etc., that would be risky with a handheld micrometer. Added an angled version (white) which makes…
Base holds a Starrett micrometer for safe measuring of delicate watch parts that would be risky by handholding a micrometer. Printed in PLA for an older Starrett mic 496-1in. I can't promise it will fit other/all Starrett models. Includes…
Replacement micrometer cases for Mitutoyo 0-1" model 103 micrometers. Designed for Laney College Machine Technology Dept. Model is print in place, features a swing latch, cutouts for a micrometer and adjustment wrench, and has stacking…
Print the base and clamp with %40 or better infill. Not for strength so much as weight. Hardware is a 1/4 " by 2 " carriage bolt and nut. You may need a longer one and another nut to draw the nut up into the base with a wrench. Shaped…
Standard PLA settings, Tree Supports and brim highly recommended
A micrometer holder that can be attached to a Skadis board. The approximate dimensions of the packaging for my micrometer are 160 mm x 31 mm x 90 mm. https://youtu.be/IsiHvHwD6jE
Mahr Indicating Micrometer 0-25mm Gridfinity Bin
Mitutoyo 293-332-30 2-3" Digital Micrometer Gridfinity Bin
Mitutoyo 340-551-30 Interchangeable Anvil 0-6" Micrometer Gridfinity Bin
Mitutoyo 342-351-30 0-1" Point Micrometer Gridfinity Bin
Generic tray for holding a wide range of micrometers in different styles.
Magnetic Storage Box for Helios Preisser Micrometer 100-125mm: Details: Material: PLA Magnets: 4x5mm (8 pcs) Notice: If you need other box/magnet sizes, the Fusion 360 File is also ready for download.
Insert for Vernier Micrometer instead of digital Print Settings: Printer: Prusa Mini + Material: PLA or TPU Infill: 10% gyroid
Gridfinity 1" iGAGING Micrometer Holder 2x4 Grid Size
Gridfinity 2" iGAGING Micrometer Holder 2x5 Grid Size
Gridfinity 3" iGAGING Micrometer Holder 3x6 Grid Size
Gridfinity 4" iGAGING Micrometer Holder 3x6 Grid Size
Gridfinity 0-4" iGAGING Micrometer Set Holder
6x5 Gridfinity tray based on Clough42's model and other similar ideas but made for a set of 4 generic micrometers.
Created for the Mitutoyo 129-127 depth micrometer. 3x5 gridfinity grid. Small storage compartment with lid for micrometer wrenches and small hex key that accompanies the depth micrometer.
As the name implies: a gridfinity holder for the Mitutoyo 293 Micrometer.
Stand for micrometers. I just added a little longer screw for a better fit to the original model. Update Nov. 2022: For enough strength use PETG and print the Screw and Nut with 100% infill to make them stronger. For more grip and less…
Created a 0-1" Mitutoyo micrometer container; it will only fit the standard silver, the green has too many odd edges to make both fit well without them bouncing around. It is standard gridfinity height 4.
Box is to hold specific brand V-anvil micrometer. It is 4U tall (keeping with gridfinity standards), and has a sharp edge; it is fully recessed in box.
Modeled myself in fusion 360 using the gridfinity design. Holds 3 micrometer wrenches. All of mine are Starrett brand. Holds wrenches 70 mm long and under and 2 mm thick and under with some play. Other holder is for the battery tool that…
Modeled myself in fusion 360 using the gridfinity design. designed around the Starrett part number 234a-6 rods. Fits in short Kennedy toolbox drawers. Please like, follow, rate and upload your makes.
Mount for Digital Micrometer – Multiboard Wall System I designed this custom-fit holder for my digital micrometer — a great and affordable model available on Amazon (link below). The tool was often lying around on my workbench, which…
A 4x2 gridfinity bin for the Moore & Write internal bore 2 point micrometer
made with tooltrace ai, modified in inventor
Yet another generic micrometer holder. Generic isn't as consistent as another remixer noted. Adjusted for both the slightly deeper tool size and the adjustment tool holder. Printed with 10% infil.
Mount to hold a Mitutoyo micrometer head to use as the adjustable z-axis endstop. Also includes the lower mount for the switch and rod clamp to hold it to a 10mm rod. Print instructions Category: 3D Printer Parts Instructions The…
Here is a mini keychain Micrometer for the great machinists out there who struggle to explain what it is we do exactly to the everyday people. If you are not a simple machinist you can print this for that machinist in your life and watch…
Could not find one for this size so designed one.
This tray allows you to not have to retract the spindle to store the mic.
I printed mine in PETG on my A1 printer sans supports on both pieces. Be careful you don't accidentally print the cover wrong side up by mistake in which case you would need to enable supports. You will also need a 100 mm long dowel in…
Ikea Skadis shelf for micrometer holder by the author "wehrenseb" Link: https://www.printables.com/model/240916-microme
Tray for storing micrometers and calipers vertically in a drawer or on your desk
Gridfinity bin for the Mitutoyo Deep Throat Digital 1" Micrometer 389-351-30
Gridfinity bin for Mitutoyo 329-350-30 Digital Depth Micrometer
I wanted a bin that would hold everything below the surface to allow other bins to easily stack on top as this isn't used as frequently as other tools. I have provided the .STEP file which should be able to drag and drop into most slicers…
1" Micrometer Bin — Gridfinity Compatible Built specifically around a 1" Starrett micrometer and its small wrench. The cutouts are shaped to hold the mic securely without rattling around — no generic rectangular pocket, just a clean fit…
Mitutoyo Digimatic Micrometer insert for Bambu P2S Tool Box
An easy and stable tool to mount a micrometer, a.k.a dial gauge, on the banjo of a woodturning lathe, as may be needed to determine bearing play, and trueness of center of appendages. The dimensions are set for the MidiPro lathe, which…
Rework of the original to add a material table for measuring small parts
Print, fill with concrete or sand, glue in the plug, add rubber feet, cut the threads. The one at the photo has main body printed in PETG and jaw liner in foaming TPU. M5 x 45 mm bolt and M5 x 30 mm bolts. Threads cut in plastic. For…
The Tesamaster is a precision micrometers with a mechanical digital counter that slides along the micrometer barrel. If the plastic slider (or key, denoted as K in manual) breaks or becomes worn out, the counter stops working or becomes…
These holders set your micrometer at a slight angle so they are easier to grab. These are sized for Starrett micrometers; the FreeCad drawing is provided if you want to customize it for other brands. Print without supports.
[Addendum May 1, 2022 : Added optional components for metal clamp screw. See below.] This is not a remix, but it is inspired by this print by Steven Nelson :…
Este es un set de piezas de repuesto para micrómetros Stronger de 0-25mm o similares. Consta de 3 piezas, la parte frontal y trasera (ambas son asimétricas) de las piezas plásticas, para sostener el instrumento, y la palanca de freno.…
A micrometer case for a Mitutoyo micrometer - it may fit other brands, but you will need to check fit / sizing. Print instructions Use a brim to prevent warping 2x2mm rare earth magnets are glued into the holes on lid and base Hinges…
An insert for a micrometer case - the foam / plastic insert was broken when I purchased the mic, so I modelled and printed a replacement.
An insert for a micrometer case - the foam / plastic insert was broken when I purchased the mic, so I modelled and printed a replacement.
Note: there are two versions of the switch bracket. Choose the longer one if you have the newer endstop switches with wheels on the arms. Note: this part fits the 8" i3v. The 10" printer has longer X extrusions that block the screw unless…
Micrometer Stand To use your micrometer properly , you need to put it on a stand, so you have one hand for the screw and one to hold the object to measure! Works best if the handle of your micrometer is about 11-16mm thick ! Additional…
Dieser Halter ist für ein Micrometer (Neotec) am Tronxy X5SA 400 Pro. Die Messuhr nehme ich ab und an mal um das Druckbett zu leveln. Die Messuhr wird mit einer M6 x 20mm Schraube am Halter angeschraubt. Jetzt kann der Halter auf die…
Building this project requires three printed parts: the base, the knob, and the press head. The non-printed parts are simply two standard 5/16" hex nuts, and one 5/16" x 1.5" long hex bolt. Assembly: Press the bolt head into the knob hex.…
This is a pegboard mounted holder for a Starrett micrometer with a .565" handle and a .27" spindle. It mounts to 1/4" hole pegboard using the push rivets I designed and uploaded to Thingiverse. Print using PLA, any infill desired will be…
This is a pegboard mounted holder for a Sears micrometer with a .67" handle and .27" spindle. Attaches to 1/4" pegboard using the push rivets I designed and uploaded to thingiverse. Print using PLA. No supports should be necessary. Any…
This is for mounting the micrometer on a tool wall. I used M3x14 but you can use shorter ones.
Remixed from the first Mitutoyo caliper holder from the OG . Fits 293-340-30, but might fit others.
I got my micrometer from second hand without the original one, so i printed it. It is designed for 17mm diameter shaft and 1.5mm wide slot in it. Works well, only downside is that it is wide (so it won't definitely break off the “tooth”),…
This is great while working at your desk measuring small things that you need to draw and print. The top and bottom “teeth” measure inside and outside dimensions. The pointy extension on the right end measures hole depth. The hash marks…
A Mitutoyo 148-507 micrometer head will reportedly fit this one. I haven't personally tried it, but the person who tried it in my openbuilds Z axis mod (which uses identical micrometer support says that it will work fine) 1-21-2015 -…
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. Micrometer: https://amzn.to/3WaB8pG My other Gridfinity Designs: 1/8" Endmill Holder:…
1x2 Stand for a rexbeti micrometer. Prints fine without supports. Thinking about seeing if I can add a slot for the calipers in the same 1x2 block. Happy to upload the fusion file if folks want it.
This is a relatively simple open-top case for storing an old-style Mitutoyo 0-1" micrometer, to keep it handy in the toolbox while preventing it from banging around the other tools. Note that this was designed to form fit a specific…
A micrometer mount that holds the micrometer in a 45 degree angle so you can measure with one hand and still read the values. This is a contribution to Zack's gridfinity project: https://youtu.be/ra_9zU-mnl8 I have included the Fusion 360…
This is a single peg width double peg height holster for micrometer.
A Micrometer Caliper replacer lock switch. This thing was made with Tinkercad. Edit it online: https://www.tinkercad.com/things/lMrLeZn9N2Z Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: 0.2mm…
Printed with a 0.2mm layer height, allow it to cool fully before moving from the print bed. Carefully close the lid so that it doesn't break.
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
