1 / 3
Hula whoop gate for 600mm hulahoop
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic stand for 600mm hulahoop with max thickness of 19mm. I also have one for dive gate that has more side support
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Magnetic stand for 600mm hulahoop with max thickness of 19mm.
I also have one for dive gate that has more side support.
These use 20mm magnets around 4mm thick.
Printed with pla at around 100.5% size to compensate shrinkage