1 / 1
Hula whoop divegate for 600mm hulahoop — zdjęcie 1

Hula whoop divegate for 600mm hulahoop

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic stand for 600mm hulahoop with max thickness of 19mm. Side supports for horizontal placement

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Magnetic stand for 600mm hulahoop with max thickness of 19mm.

This one is modified so it can be placed horizontally and doesnt tip under the weight of hulahoop

These use 20mm magnets around 4mm thick.

Printed with pla at around 100.5% size to compensate shrinkage


Photo without side supports, see 3d model

Tagi