Silica Container for Sunlu 3kg filament spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silica container made for reusable 3kg spools from Sunlu
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a large container for your hard-earned silica.
It was modeled around the reusable 3kg Sunlu filament spool.
No one should require this much silica to dry one spool. However, this solves the issue of the spool being dragged out of the rollers when there is not much filament left.
The tube is held in place by the flanges (disassemble the spool to insert the tube). It also features a slot that prevents it from rotating.
The cap can be screwed in with the spool assembled. The thread is tight - use hand soap, and screw the cap in with the palm of your hand. Do not insert levers into the mesh, unless you want to spill your silica.
The holes of the mesh are 3mm in diameter. This holds granular silica just right.
I've put the photos in a chronological order. If you have any questions - please write them in the comments.
If you have some spare, we could use some support at https://drukarmy.org.ua/en/donate
Thank you so much.