Improved NA Miata Armrest Screw Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix to improve the fitment of the NA Miata Armrest cover
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model improves the fitment of the NA Miata armrest screw cover. You can see the new vs old fitment in the picture.
It should be printed face down (as oriented in the model). I printed it on a textured bed so it has some wrinkle finish, and did no other post processing. I had good luck with TPU which also makes it pretty easily removable, but it could probably be printed with ASA or another stiffer material designed to withstand UV and car interior heat.
There should be support under one the of overhangs. I used organic supports with great success (set overhang angle to 25 in the slicer and it should only put supports on that part - supports on build plate only).
To print the passenger side, mirror the part in the slicer (across Z axis).