USB Foot Pedal x3 - Pi Pico, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A three-pedal USB foot switch built around a Raspberry Pi Pico and real Cherry MX–style mechanical switches.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hands busy? Use your feet.
A three-pedal USB foot switch built around a Raspberry Pi Pico and real Cherry MX–style mechanical switches. Plug it in and it works like a keyboard on any computer, with no drivers.
Use it for push-to-talk, muting Discord, Stream Deck / OBS actions, page turning, transcription, or any hotkey you’d rather not reach for.
Features
Three independent pedals. Each sends its own key or combo (like Ctrl+Shift+F13).
Change keys without coding using the free Pedal Config app for Windows. Settings save on the pedal itself.
Prints without supports. PLA or PETG.
Clicky mechanical switches (I used MX Blue). Quieter switches work too.
Metal springs for a solid return.
Defaults to F13 / F14 / F15, keys that don’t exist on normal keyboards, so they never clash with typing.
Print profiles
270 × 270 mm bed or larger (Snapmaker U1, Bambu H2D and similar): base prints in one piece.
Bambu P1S / X1C / A1 (256 mm): base is pre-split into two halves with alignment dowels. Test-fit the dowels, then glue (CA) or plastic-weld the halves together.
Settings: 0.20 mm layers, 2 walls, 15% infill, no supports.
What you’ll need
1× Raspberry Pi Pico (or Pico 2)
3× Cherry MX–style switches
6× compression springs, 3/8" × 3/4" (≈9.5 × 19 mm). The Harbor Freight 200-piece assorted set has enough.
6× M3 heat-set inserts (optional, recommended)
6× M3 × 4 screws
22 AWG wire
2× Wago 221 lever connectors (or solder) for the shared ground
M2 self-tapping screws or hot glue to mount the Pico
Assembly (short version)
Install the heat-set inserts. Go slow, since the angle is awkward.
Mount the Pico in the far-left pedal with screws or dots of hot glue.
Wire each switch to its own Pico pin (GP18, GP17, GP16, left to right) and a shared ground.
Two springs per pedal.
Fit the middle pedal first, then the outer two. Don’t over-tighten the pivot screws: snug, but the pedal must still pivot freely.
📖 Full guide, wiring diagram, firmware and app: https://github.com/savethechicken/foot-pedal
Software (free)
Firmware: download firmware.zip from the GitHub Releases page, install CircuitPython on the Pico, and drag the files on.
Pedal Config app: change any pedal’s key with a few clicks. The Windows .exe needs no Python install.
Credits
Inspired by the USB Foot Switch by rumg3drucke on MakerWorld. This is a ground-up redesign at a different size, and parts aren’t interchangeable with the original.
