120 mm Desk Fan / Ventilateur de bureau 120 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basé sur une conception précédente "120 mm fan shroud for focusing airflow"
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
FR FR MAJ du 08/11/2026
Rajout de fichiers EOLE-Concentrateur-Horaire-V2 et EOLE-Concentrateur-Anti-Horaire-V2 en .stl et .STEP
Le but est de déplacer le centre de masse de 7 mm vers l'avant pour un meilleur équilibre.
Par la même occasion cela permet d'économiser 32% de support.
Ventilateur de bureau basé sur un ventilateur de boitier d'ordinateur de 120 mm.
Rotation sur 360°.
Imprimez deux pieds et deux goujons. Emboitez les deux goujons sur un pied
Emboitez un concentrateur de votre choix puis emboitez le second pied
tous les emboitements se feront en force. Pour assurer le bon fonctionnement, respectez le sens des fichiers.stl sur le plateau.
Pas de support pour les pieds, les goujons et la grille. Pour les autres pièces, activez les supports.
Le concentrateur se met du côté de l'étiquette de caractéristique et des bras de fixation.
Si sur votre ventilateur les flèches ne sont pas présentes, commencez par déterminer le sens de rotation en branchant brièvement celui-ci et marquez-le sens de rotation dessus.
Pour le sens de circulation de l'air, il va de la face avant (celle sans étiquette de caractéristique ni de bras de fixation) vers la face arrière.
Choisissez le concentrateur qui a les mêmes flèches (voir PDF ou JPEG)
Voilà.
EN Updated on 8 November 2026
Added the ‘Concentrateur-Horaire-V2’ and ‘Concentrateur-Anti-Horaire-V2’ files in .stl and .STEP formats
The aim is to shift the centre of mass 7 mm forwards for better balance.
At the same time, this reduces the amount of support material required by 32 per cent.
Desk fan based on a 120 mm computer case fan.
360° rotation.
Print two legs and two pins. Fit the two pins onto one leg
Fit a hub of your choice, then fit the second leg
All parts must be snapped into place firmly. To ensure correct operation, follow the orientation specified in the .stl files on the build plate.
No support required for the legs, studs or grille. For the other parts, enable support structures.
The concentrator should be positioned on the side with the specification label and the mounting arms.
If there are no arrows on your fan, start by determining the direction of rotation by plugging it in briefly and marking the direction of rotation on it.
The direction of airflow is from the front (the side without the rating plate or mounting arms) towards the rear.
Choose the concentrator with the same arrows (see PDF or JPEG)
Voilà.
Translated with DeepL.com (free version)