Low Center of Gravity Conversion for Losi Micro-B

Full instructions can be found here:

https://officepizzaparty.neocities.org/Micro-B%20LCG%20Kit%20Assembly%20Instructions.pdf

This is a neat conversion for the Losi Micro-B that converts the layout to a lower center of gravity configuration. It also allows for both retro bodies and modern cab-forward bodies to be used without changing the electronics around. The weak antenna is provided two support options - tubed or tucked into the esc case. The cable management is designed into the kit so it keeps wires from interfering with the body shell. Overall it just cleans up the little buggy nicely with the stock electronics.

How does it drive? Improved, more predictable handling on flat surfaces as you'd expect. I also find it much nicer to live with given the battery strap and cleaner wiring.

Required Materials:

• 1x Antenna tube (optional)

• Hook-and-loop for body mounting

• 1x Losi Micro-B

Printing Notes:

• Small parts, I printed them all with a 0.2mm nozzle at 0.10mm layer height.

• 6 walls? the more the better imo

• Example of my recommended orientation included in the photos

• The threads on these screws are TINY, so if your filament is over/underextruded it will affect the functionality of the threaded holes

Parts List:

• Bottom Case

• Top Case

• Left Side Rail

• Right Side Rail

• Battery Strap

• Servo Mount

• Waterfall

• Antenna Washer

Enjoy!