Super simple universal phone holder - MX Keys S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very simple but universal phone holder. It's a snap-on-solution that can take most phones in both orientations.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I made this very simple phone holder. It consists of two parts that are snapped onto the MX Keys S and can be adjusted to the width of the phone. Free placement of course and if centred, maybe some will want to print also the spacers to level the keyboard on the whole width. The phone or even tablet can be placed if they are thinner than 12 mm, I tested also with very slim phones and it seem to work quite well.
I printed it with 15% infill out of PETG, 0.20 mm layer. I guess PLA will also work but maybe not snap in so well.