Heavy-Duty Cord and Hose Hanger - Wall Bracket for Extension Cords, Hoses, Rope (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strong wall bracket with a saddle, lip and gusset for coiled cords, hoses and straps. Prints on its side, no supports.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hang a coiled extension cord, a garden hose, rope, ratchet straps or cables on the garage or shed wall.
DESIGN
• 90 mm arm with a shallow saddle, so coils settle in the middle, and a raised lip so they can't slide off.
• A gusset underneath braces the arm against the wall plate.
• Two counterbored holes for 4-5 mm screws.
• Prints on its side, so the whole profile is upright walls: no supports, no overhangs, and the layers run along the arm, the strong way. Bambu Studio: 1 h 07, 36 g, no warnings.
CUSTOMIZE (OpenSCAD)
Arm length (40 to 160 mm), width, lip height and screw size.
PETG for outdoor use, 4-5 walls and 25% infill for heavy hoses.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.