Haddacerra Gateway — CM4 Enclosure (for RC-N1 / RC-N3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry CM4 Carrier board Enclosure
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Open Community License v1.1
Make your own CM4 carrier box for the DJI RC-N1 or RC-N3
This version includes: SPST mini on/off switch
DPDT switch (for mode selection)
USB-C port (for charging or wired power mode)
2.42 OLED screen(for system info, bat power, control state, and more)
2x Forward SMA Flange ports in the front(for panel antennas, antennas not shown in the pics)
Only STL files available for now.
This is the custom designed enclosure for the Haddacerra gateway system which houses the main Raspberry Pi CM4 carrier board, the daughter card, 2000mah battery and a few more goodies.
the box is designed to fit to the maximum allowed width of the RC N1-3 arm (85mm) and the size of the RC N1 body (~150mm), it is made to be durable with 3mm+ thickness to the outside areas of the box and fit snugly into the RC N1-3 without disrupting any original function.
the Height of the box with the lid is 24mm allowing to use 25mm screws easily, the internal height is ~18mm, this gives a great balance of industrial durability and internal space.
Im happy to share this design with everyone for free, i would love to see if you used my design for any purpose you can think of !
Why would you want this design?
Well, IT LOOKS REALLY GOOD! Maybe you just want this beauty around, or have ideas to improve it even more !
Or you might be thinking to make your own modification or carrier board for the RC N1-3 and looking at enclosure designs to give it a home, well you just found it!
feel free to check the Haddacerra https://haddacerra.com project !
and on TikTok https://tiktok.com/@haddacerra