HDMI cable support for DJI Phantom/Inspire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DJI cable protector for Phantom and Inspire controllers. HDMI and usb cables plugged into a DJI Phantom or Inspire…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
DJI cable protector for Phantom and Inspire controllers.
HDMI and usb cables plugged into a DJI Phantom or Inspire controller can be easily damaged with even a small amount of pulling or twisting.
This mount is designed to slot into the rear metal handle of the DJI Phantom and Inspire controller to help support and protect cables and ports from accidental damage.
Since there are a variety of cables and adapters that people use, I designed this with a secondary customizable adapter tray that fits into the main mount. Ideally you want a snug fit for your cables in the adapter tray, if they don't quite fit or align, you may consider customizing your own adapter for your particular cables.
Important note: Be careful with using an adapter the first time, - if it doesn't quite fit or align your cables to the ports, you may do damage if you force it! Better to customize a new adapter tray. Scad file to follow once I clean it up a bit. ;)
Fly safe!
Print Settings
Printer Brand:
Zortrax
Printer:
Zortrax M200
Supports:
No
Resolution:
0.19
Infill:
low
Notes:
This should print without supports.
Category: R/C Vehicles