UGREEN UM106X / CM753 2.5G Switch Under-Desk Slide Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slide-in under-desk holder for the UGREEN UM106X 2.5G switch (5x 2.5G + 10G SFP+). Glue or screw it on, no supports.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Under-desk slide mount for the UGREEN 6-port 2.5G switch, model UM106X / CM753 (5x 2.5GbE + 1x 10G SFP+, metal housing, 160 x 104 x 28 mm).
How it works
C-shaped rail that you stick (3M VHB tape) or screw under your desk.
Slide the switch in from the front, ports facing you: it clicks over two flexible tabs.
Fixed stop at the back, clips at the front: plugging or unplugging cables won't move it.
To remove it: push the two tabs down from below and pull.
Ribs on the ceiling keep an air gap above the switch, the side windows face its vents and the bottom stays open.
Everything stays clear: RJ45 and SFP+ ports, mode switch, 12V power plug and ground screw at the back.
4 optional 4.5 mm screw holes (recommended, the switch is heavier than a charger).
Printing
The STL is already oriented: front face on the bed. No supports needed. A brim is recommended (the part stands 119 mm tall).
Footprint 192 x 37 mm: fits MK3/MK4/Core One beds. On a MINI, rotate it 45 degrees.
PETG or ASA recommended (the switch gets warm). 0.2 mm layers, 4 perimeters, 15-20% infill.
Size: 192 x 119 x 37 mm, about 90 g.
Adjusting the fit
Designed for the spec dimensions (160 x 104 x 28 mm) with clearance. If you stuck the rubber feet on, add their thickness to CH_H in the included Python script (uses manifold3d + trimesh) and regenerate the STL.
Same style mounts: UGREEN X767 charger https://www.printables.com/model/1867703 and D-Link DGS-105GL switch https://www.printables.com/model/1867723